Name HyoungGwon Choi
Position professor
Tel +82-2-970-6312
Fax 02-949-1486
E-mail hgchoi@seoultech.ac.kr
Journal Papers
- Passive control of flow rate change due to the input pressure fluctuation based on microchannel deformation, PHYSICS OF FLUIDS, vol.35 No.10, 2023
- A semi-implicit finite element formulation of the partitioned method for fluid-structure interaction based on a flux boundary condition of pressure equation, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.37 No.5 pp.2417~2424, 2023
- Semi-monolithic formulation based on a projection method for simulating fluid-structure interaction problems, COMPUTERS & MATHEMATICS WITH APPLICATIONS, vol.134 pp.207~224, 2023
- A meshless geometric multigrid method for a grid with a high aspect ratio, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.36 No.11 pp.5551~5559, 2022
- High-order level set reinitialization for multiphase flow simulations based on unstructured grids, COMPUTERS & MATHEMATICS WITH APPLICATIONS, vol.120 pp.60~77, 2022
- Evaluation of pressure and viscous drags of a rising bubble at small Reynolds numbers, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.36 No.3 pp.1303~1313, 2022
- 등가누출직경을 적용한 음속 제트 누출의 폭발위험장소 범위 산정을 위한 수치 해석적 연구, . Korean Soc. Hazard Mitig, vol.21 No.4 pp.121~127, 2021
- A NUMERICAL STUDY ON INSTALLATION LOCATION OF A URBAN GAS DETECTOR BY USING EQUIVALENT LEAK DIAMETER, Journal of Computational Fluids Engineering, vol.26 No.2 pp.94~100, 2021
- A meshless geometric multigrid method based on a node-coarsening algorithm for the linear finite element discretization, Computers and Mathematics with Applications, vol.96 pp.31~43, 2021
- A coupled level set/volume of fluid method for simulation of two-phase flow on unstructured grids, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.35 No.2 pp.625~634, 2021
- Performance comparison of parallel ILU preconditioners for the incompressible Navier-Stokes equations, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.34 No.3 pp.1175~1184, 2020
- A multi-level adaptive mesh refinement for an integrated finite element/level set formulation to simulate multiphase flows with surface tension, Computers and Mathematics with Applications, vol.79 No.4 pp.908~933, 2020
- Treatments of the singularity in the level set method for unstructured meshes, Finite Elements in Analysis and Design, vol.162 pp.34~50, 2019
- Development of a coloring method for P2P1 finite element for parallel computation of ILU preconditioner, Transactions of the Korean Society of Mechanical Engineers - B, vol.43 No.10 pp.699~706, 2019
- Performance comparison of interpolation operators of multi-grid method based on a distance weighted and area (volume) intersection approaches Part II: Finite element discretization, Journal of Mechanical Science and Technology, vol.33 No.7 pp.3323~3331, 2019
- Performance comparison of interpolation operators of multigrid methods based on distance weight and area (volume) intersection approaches Part I: Finite volume discretization, Journal of Mechanical Science and Technology, vol.33 No.5 pp.2219~2224, 2019
- Performance comparison of various parallel incomplete LU factorization preconditioners for domain decomposition method, Journal of Mechanical Science and Technology, vol.32 No.11 pp.5315~5323, 2018
- Efficient direct re-initialization approach of a level set method for unstructured meshes, Computers and Fluids, vol.154 pp.167~183, 2017
- A multi-level adaptive mesh refinement method for level set simulations of multiphase flow on unstructured meshes, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, vol.110 No.10 pp.947~971, 2017
- An investigation of the performance of the colored Gauss-Seidel solver on CPU and GPU, Transactions of the Korean Society of Mechanical Engineers, B, vol.41 No.2 pp.117~124, 2017
- A dynamic adaptation method based on unstructured mesh for solving sloshing problems, Ocean Engineering, vol.129 pp.203~216, 2017
- A local level set method based on a finite element method for unstructured meshes, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.30 No.12 pp.5539~5545, 2016
- Numerical analysis of conjugate heat transfer for various ice-ball shapes, Transactions of the Korean Society of Mechanical Engineers, B, vol.40 No.9 pp.605~612, 2016
- A study on GPU computing of Bi-conjugate gradient method for finite element analysis of the incompressible Navier-Stokes equations, Transactions of the Korean Society of Mechanical Engineers, B, vol.40 No.9 pp.597~604, 2016
- A Q2Q1 integrated finite element method with the semi-implicit consistent CSF for solving incompressible two-phase flows with surface tension effect, International Journal for Numerical Methods in Fluids, vol.81 No.5 pp.284~308, 2016
- Domain decomposition parallel computing for transient two-phase flow of nuclear reactors, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.30 No.5 pp.2045~2057, 2016
- A comparative study of reinitialization approaches of the level set method for simulating free-surface flows, Journal of Mechanical Science and Technology, vol.30 No.4 pp.1681~1689, 2016
- Temporal discretization of viscous stress terms of incompressible Navier–Stokes equations with surface tension effect, Journal of Mechanical Science and Technology, vol.29 No.12 pp.5273~5279, 2015
- Numerical Analysis for the Conjugate Heat Transfer of Skin Under Various Temperature Conditions of Contrast Therapy, 대한기계학회논문집 B, vol.39 No.11 pp.897~903, 2015
- Numerical analysis for the conjugate heat transfer of skin under contrast therapy, International Journal of Heat and Mass Transfer, vol.86 No.0 pp.388~396, 2015
- A finite element analysis of turbulent eccentric stenotic flows by large eddy simulation, Journal of Mechanical Science and Technology, vol.29 No.5 pp.1869~1874, 2015
- Comparison of Message Passing Interface and Hybrid Programming Models to Solve Pressure Equation in Distributed Memory System, 대한기계학회논문집 B, vol.39 No.2 pp.191~197, 2015
- 다양한 디퓨저 형상의 유량 분배 특성에 관한 수치해석 연구, 대한기계학회논문집 B, vol.38 No.9 pp.789~795, 2014
- 이더넷과 인피니밴드 네트워크 기반의 분산메모리 시스템에서 병렬성능 분석, 한국전산유체공학회지, vol.19 No.2 pp.24~29, 2014
- 인버터 기동반의 열전달 예측을 위한 수치해석, 반도체디스플레이기술학회지, vol.13 No.2 pp.57~62, 2014
- 오일의 유량 변화와 오프셋 스트립 휜을 고려한 오일쿨러의 복합열전달 해석, 한국전산유체공학회지, vol.19 No.1 pp.34~40, 2014
- 소방 배관 동파방지용 열선의 위치 선정을 위한 비정상 열전달 수치해석, 한국화재소방학회 논문지, vol.28 No.1 pp.52~57, 2014
- SYMMETRIC MULTI-PROCESSING 시스템에서 다양한 병렬 기법 모델을 적용한 병렬 CUPID 코드의 성능분석, 대한기계학회논문집 B, vol.38 No.1 pp.71~79, 2014
- Investigation of the parallel efficiency of a PC cluster for the simulation of a CFD problem, Personal and Ubiquitous Computing, 2013
- NUMERICAL ANALYSIS OF CONJUGATE HEAT TRANSFER INSIDE A THERMAL BOUNDARY LAYER CONSIDERING THE EFFECTS OF A FREE STREAM VELOCITY AND A THERMOCOUPLE POSITION, 한국전산유체공학회지, vol.18 No.1 pp.77~82, 2013
- Effect of Bifurcation Angle on Blood Flow in Flexible Carotid Artery, Transactions of the Korean Society of Mechanical engineers, b, vol.37 No.3 pp.229~235, 2013
- Effect of the Reynolds number on the conjugate heat transfer around a circular cylinder with heat source, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.26 No.12 pp.3849~3855, 2012
- Investigation of fluid-structure interactions using a velocity-linked P2/P1 finite element method and the generalized-alpha method, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, vol.90 No.12 pp.1529~1548, 2012
- Finite element simulation of blood flow in a flexible carotid artery bifurcation, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.26 No.5 pp.1355~1361, 2012
- Ceramic diesel particulate filter structure with inclined gas paths, Journal of the Korean Ceramic Society, vol.49 No.3 pp.226~230, 2012
- A numerical study on the entry problem of an elastic body using a level set method and a monolithic formulation, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.26 No.5 pp.1341~1346, 2012
- A direct reinitialization approach of level-set/splitting finite element method for simulating incompressible two-phase flows, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, vol.67 No.11 pp.1637~1654, 2011
- A Q2Q1 finite element/level-set method for simulating two-phase flows with surface tension, International Journal for Numerical Methods in Fluids, vol.70 No.4 pp.468~492, 2011
- A numerical study on the thermal stimulation of continuous moxibustion, Transactions of the Korean Society of Mechanical Engineers, vol.35 No.9 pp.915~922, 2011
- A least-square weighted residual method for level set formulation, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, vol.68 No.7 pp.887~904, 2011
- Comparison of a least-square weighted residual method and the Taylor-Galerkin method based on level set formulation for interface capturing, PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, vol.11 No.3 pp.169~174, 2011
- Direct numerical simulation of two-dimensional channel flows of electro-rheological fluids, INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, vol.48 No.11 pp.1110~1122, 2010
- Heat-transfer analysis of indirect moxibustion using unsteady conjugate heat-transfer solutions, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.24 No.10 pp.2051~2057, 2010
- A NUMERICAL STUDY ON FLOW PATTERN IN CONNECTING PASSAGEWAY OF A COMPOSITE BUILDING, 한국전산유체공학회지, vol.15 No.3 pp.81~86, 2010
Conference Papers
- Duc Vo Huynh1 (Presenter), Sang Truong Ha2 , Woo-Tae Park3 , Hyoung-Gwon Choi3, A study on unstructured mesh generation algorithms by using a tetra P2P1 finite element, KSME Annual Meeting 2022, ICC JEJU, 2022
- Sang Truong Ha, Hyounggwon Choi, A new semi-monolithic fluid-structure interaction formulation for simulating a deformable structure with a density close to a surrounding fluid, KSME유체공학부문 2021 춘계학술대회, 온라인학술대회, 2021
- 딘쾅응옥, 뇨쿠롱, 박성군,최형권, A high order method for redistancing on unstructured grids, 대한기계학회 유체공학부문 2021 춘계학술대회 논문집, 온라인학술대회, 2021
- NGO CU LONG, 최형권, An implicit high order hybridizable discontinuous Ga-lerkin method for a conservative level set method, 한국유체공학학술대회 프로그램및 초록집, 라마다 프라자 제주, 2020
- Long Cu Ngo, Hyoung Gwon Choi, , Treatments of the singularity in the level set method for unstructured meshes, 2019 년도kscfe 추계학술대회논문집, 전북새만금산학융합원 캠퍼스관, 2019
- Sang Truong Ha, 윤한영, 최형권, A partitioned FSI algorithm for simulating a pulsatile flow interacting with an artificial aortic valve, 2019 년도kscfe 추계학술대회논문집, 북새만금산학융합원 캠퍼스관, 2019
- Hanh Nguyen Cong, Sang Truong Ha, Long Cu Ngo, Han Young Yoon, Hyoung Gwon Choi, A numerical study of a new red-black format for the Gauss-Seidel method on structured grids., 2019 년도추계학술대회논문집, 전북새만금산학융합원 캠퍼스관, 2019
- Long Cu Ngo, Hyoung Gwon Choi, A numerical study on the drag force acting on a rising bubble by using level set/finite element method, AJK2019, Hyatt Regency, San Francisco, CA, 2019
- Sang Truong Ha, Sang Wook Lee, Hyoung Gwon Choi, A partitioned FSI algorithm for simulating a pulsatile turbulent flow interacting with an aortic valve, ajk2019, Hyatt Regency, San Francisco, CA, 2019
- Sang Truong Ha, Hyoung Gwon Choi, Simulation of the motion of a carotid artery interacting with blood flow by a partitioned semi-implicit algorithm, , 2019 년도 KSCFE 춘계학술대회논문집, Jeju Kal Hotel, 2019
- Long Cu Ngo, Hyoung Gwon Choi, A numerical study of single bubble rising in quiescent viscous liquid by using a level set/finite element method, 2019 년도 KSCFE 춘계학술대회논문집, Jeju Kal Hotel, 2019
- Sang Truong Ha, 최형권, , A new multigrid algorithm for finite element discretization with unstructured grids., , 2019 년도 KSME 유체공힉부문 춘계학술대회논문집, 강릉 세인트존스호텔, 2019
- Long Cu Ngo & 최형권, A numerical study on the drag correlation three-dimensional bubble rising in quiescent viscous liquid., 2019 년도 KSME 유체공힉부문 춘계학술대회논문집, 강릉 세인트존스호텔, 2019
- Long Cu Ngo, Hyoung Gwon Choi, An adaptive coupled level set/volume of fluid method for simulation of multiphase flows on unstructured grids, The first International Conference on Fluid Machinery and Automation Systems, Hanoi University of Science and Technology, Hanoi, Vietnam, 2018
- Sang Truong Ha, Han Young Yoom, Hanh Cong Nguyen, Hyoung Gwon Choi, A study on the performance of a geometry multigrid method using finite element formula for unstructured grid., Proceedings of The 12th Asian Computational Fluid Dynamics Conference, Taiwan Yilan, Silks Place Yilan, 2018
- Long Cu Ngo, Hyoung Gwon Choi, A coupled level set/volume of fluid method for simulation of multiphase flows on adaptive unstructured grids., Proceedings of The 12th Asian Computational Fluid Dynamics Conference, Taiwan Yilan, Silks Place Yilan, 2018
- Sang Truong Ha, 윤한영, 최형권, A multigrid method for hierarchical unstructured mesh for finite element method, The 10th National Congress on Fluids Engineering, 여수시 여수엑수포컨벤션센터, 2018
- Long Cu Ngo & 최형권, An adaptive coupled level set/volume of fluid method for free-surface flow simulations on unstructured grids., The 10th National Congress on Fluids Engineering, 여수시 여수엑수포컨벤션센터, 2018
- Sang Truong Ha, Han Young Yoom, Hanh Cong Nguyen, A study on the performance of a multigrid method by using hierarchical unstructured mesh of P1P1 finite element formulation, ., Jeju Kal Hotel Seogwipo, 2018
- Long Cu Ngo, Hyoung Gwon Choi, A coupled level set/volume of fluid method for unstructured grids, ., Jeju Kal Hotel Seogwipo, 2018
- Sang Truong Ha, 윤한영, 최형권,, A multigrid method for hierarchical unstructured mesh for finite element method, ., UNIST, 2018
- Long Cu Ngo & 최형권, A numerical study on 3D bubble rising problem by using level set/finite element method., ., UNIST, 2018
- Sang, Choi, A study on partitioned algorithms for solving blood flows interacting with vessel, 한국전산유체공학회추계학술대회논문집, 서울과학기술대학교, 2017
- Long, Choi, A level-set/finite-element method for simulation of bubble rising on adaptive unstructured meshes, 한국전산유체공학회추계학술대회논문집, 서울과학기술대학교, 2017
- Long, Choi, A local level set finite element method for simulating bubble rising by using adaptive unstructured meshes, The 3rd International Conference on Numerical Methods in Multiphase Flows, ICNMMF-III, June 26-29 20, Tokyo, 2017
- Muhammad Sufyan, Ngo Cu Long, 최형권, Numerical Investigations of Droplet Merging in the Microchannel, 대한기계학회 2016년도 학술대회 강연 및 논문 초록집, 강원랜드 컨벤션센터, 2016
- Ngo Cu Long, 최형권, Adaptive Finite Element Method for Multiphase Flow Simulations with Surface Tension of P2P1 Unstructured Triangular Meshes, 대한기계학회 2016년도 학술대회 강연 및 논문 초록집, 강원랜드 컨벤션센터, 2016
- 윤종선, 전병진, 최형권, Coloring이 적용된 Gauss-Seidel 해법을 통한 GPU의 연산 효율에 관한 연구, 2016 추계학술대회 논문집, 부산대학교 상남 국제회관, 2016
- Ha Trong Sang, 최형권, A numerical investigation of various partitioned method for simulating fluid-structure interactions of blood vessel, 2016 추계학술대회 논문지, 부산대학교 상남국제회관, 2016
- Ngo Cu Long, Hyoung Gwon Choi, A parallel Aadaptive finite element method for simulating incompressible flows with free surface, Proceedings of the 9th Nationla Congress on Fluids Engineering, 대구,EXCO, 2016
- Truong Sang Ha, Ngo Cu Long, Byoungjin jeon, Hyoung Gwon Choi, Comparison of PartiTloned and monolitihic FSI formulations based on FEM and application for simulation of stenosis flows, Proceedings of the 9th National Congress on Fluid Engineering, 대구 EXCO, 2016
- 윤종선, 전병진, 정혜동, 최형권, GPU 기반의 3단계 분리 유한요소법을 이용한 유체구조 상호작용 문제 및 협착이 존재하는 혈관 문제 해석, Proceedings of the 9th National Congress on Fluid Engineering, 대구EXCO, 2016
- 전병진, 최형권, 다양한 협착비와 편심율을 고려한 스테노시스 유동에 대한 직접수치해석, Proceedings of the 9th National Congress on Fluids Engineering, 대구 EXCO, 2016
- Minh Tuan Nguyen, Hyuk Jae Chang, Sang Wook Lee, Hyoung Gwon Choi, MPI Parallel Computing based Domain Decomposition Method for Multi-Scale Simulations of Patient-specific Coronary Flow, Proceedings of the 9th Nationla Congress on Fluids Engineering, 대구 EXCO, 2016
- Ngo Cu Long, Choi Hyoung-Gwon, A PARALLEL ADAPTIVE FINITE ELEMENT METHOD FOR SIMULATING THE INCOMPRESSIBLE FLOWS WITH FREE SURFACE, the 9th International Conference on Multiphase Flow, Palazzo dei Congressi, Firenze (Italy), 2016
- 오한나,박다애,전병진,김은정,이승덕,최형권, 온냉요법 임상으로부터 얻은 다양한 온도경계조건들에 대한 피부 내 수치해석, 대한기계학회 창립 70주년 기념 학술대회 논문집, ICC제주, 2015
- 황지현,김기용,전병진,최형권, 비뉴톤 효과를 고려한 3차원 스테노시스 혈류유동에 대한 수치해석, 대한기계학회 창립 70주년 학술대회 논문집, icc제주, 2015
- 전병진, 장혁재, 최형권, 다양한 협착 면적을 고려한 3차원 비대칭 스테노시스 유동의 수치해석, 대한기계학회 창립 70주년 기념 학술대회 논문집, ICC제주, 2015
- 전병진, 김정우, 최형권, A PARALLEL FINITE ELEMENT METHOD FOR LES SIMULATIONS OF STENOTIC TURBULENT FLOWS, ASME-JSME-KSME Joint Fluids Engineering Conference 2015, 코엑스, 2015
- Ngo Cu Long, Hyoung Gwon Choi, AN EFFICIENT DIRECT REDISTANCE TECHNIQUE OF LEVEL SET METHOD FOR UNSTRUCTURED MESHES, Proceedings of the ASME-JSME-KSME Joint Fluids Engineering Conference 2015, 코엑스, 2015
- MUHAMMAD SUFYAN, NGO CU LONG, HYOUNG GWON CHOI, A DYNAMIC ADAPTIVE FINITE ELEMENT METHOD FOR LEVEL SET FORMULATION, ASME-JSME-KSME Joint Fluids Engineering Conference 2015, 코엑스, 2015
- 전병진, 최형권, 영역분할방법과 MPI를 이용한 UZAWA 알고리듬의 병렬해법에 대한 연구, 2015년 한국전산유체공학회 춘계학술대회 논문집, 제주시 칼 호텔, 2015
- 오한나,박다애,김은정,이승덕,최형권, 냉온자극의 다양한 온도경계조건들에 대한 피부 내 온도 분포의 수치해석, Proceedings of the KSME Fall Annual Meeting, 김대중컨벤션센터, 2014
- 전병진, 최형권, 다양한 LES 모델을 고려한 3차원 비대칭 스테노시스 유동에 대한 수치해석, Proceedings of the KSME Fall Annual Meeting, 김대중컨벤션센터, 2014
- 전병진, 김정우, 최형권, A finite element analysis of turbulent eccentric stenosis flows by using a large eddy simulation model, Proceedings of the Tenth Asian Computational Fluid Dynamics Conference, 제주 그랜드호텔, 2014
- Muhammad Sufyan, Ngo CuLong, Hyoung G. Choi, A two-dimensional adaptive finite element method for the analysis of sloshing, Proceedings of the Tenth Asian Computational Fluid Dynamics Conference, 제주 그랜드호텔, 2014
- 박서원, 유명상, 임주환, 최형권, 자동차 도장설비에서 유동균일도 향상에 대한 수치해석, The 8th National Congress on Fluids Engineering, 롯데 부여리조트, 2014
- 김명수, 박서원, 이철우, 최형권, Numerical analysis on conjugate heat transfer for different ice ball shapes, The 8th National Congress on Fluids Engineering, 롯데 부여리조트, 2014
- 전병진, 최형권, 인피니밴드 기반의 클러스터 시스템에서 다양한 병렬기법 모델들을 적용한 대각/ILU 예조건화 기법의 성능 분석, The 8th National Congress on Fluids Engineering, 롯데 부여리조트, 2014
- 전병진, 최형권, Performance analysis of the parallel cupid code for various parallel programming models in a cluster system based on infiniband, 한국전산유체공학회 2014년도 춘계학술대회 논문집, 제주시 KAL 호텔, 2014
- 이동욱, 최형권, 배관 동파방지용 열선의 위치 선정을 위한 비정상 열전달 수치해석, 대한기계학회 춘추학술대회 논문집, 강원랜드 컨벤션센터, 2013
- 한지훈, 김득규, 최형권한지훈, 김득규, 최형권, 근적외선 레이저의 열 자극에 대한 수치해석, 대한기계학회 춘추학술대회 논문집, 강원랜드 컨벤션센터, 2013
- 최형권, 비압축성 유동장의 해석을 위한 통합유한요소법과 분리 유한요소법의 비교, 한국전산유체공학회 학술대회 논문집, 서울과학기술대학교, 2013
- 전병진, 최형권, SMP 시스템에서 다양한 병렬기법 모델들을 적용한 대각/ILU 예조건화 기법의 성능 분석, 한국전산유체공학회 학술대회 논문집, 서울과학기술대학교, 2013
- 한상조, 전병진, 강영석, 최형권, 터빈에서 열전달 해석과 실험의 열전달계수 비교, 한국전산유체공학회 학술대회 논문집, 서울과학기술대학교, 2013
- 박서원, 이동욱, 최형권, 유량 변화와 오프셋 스트립 휜이 오일쿨러에 미치는 복합열전달 특성, 한국전산유체공학회 학술대회 논문집, 서울과학기술대학교, 2013
- 한상조, 최형권, A finite element analysis of conjugate heat transfer inside a cavity with a heat generating conducting body, Proceedings of ICISA 2013, Hilton Pattaya Hotel, 2013
- 한상조, 최형권, Parallel simulation of an unsteady forced convection around a linear cascade using PC-cluster, Proceedings of ICISA 2013, Hilton Pattaya Hotel, 2013
- 한상조, 최형권, Q2P1 splitting finite element method for large eddy simulation, Proceedings of ICISA 2013, Hilton Pattaya Hotel, 2013
- 최형권, A fully-coupled FEM for fluid-structure interaction problems, 2012년 한국전산유체공학회 추계학술대회 논문집, 부산대학교, 2012
- 이주안,전병진,한상조,최형, 온도 경계층 내에서 열전대를 포함한 복합열전달, 제7회 한국유체공학학술대회 논문집, 경주 드림센터, 2012
- 한상조, 전병진, 최형권, 터빈 표면에서 국소 대류 열전달 수치해석과 실험 결과 비교 고찰, 대한기계학회 2012년도 열공학부문 춘계학술대회 논문집, 용평리조트, 2012
- 전병진,이상훈,김은정,이승덕,최형, 온냉 자극이 피부조직에 미치는 영향에 대한 수치해석 연구, 한국전산유체공학회 2012년도 춘계학술대회 논문집, 제주 서귀포 KAL Hotel, 2012
- 전병진,이주안,이동현,김용석,최형권, 강제대류하의 회전하는 실린더 주위의 복합열전달 수치해석, 한국전산유체공학회 2012년도 춘계학술대회 논문집, 제주 서귀포 KAL Hotel, 2012
- 박명성,박서원,최형권, 휜 형상을 고려한 차량용 오일 쿨러의 수치해석, 한국전산유체공학회 2012년도 춘계학술대회 논문집, 제주 서귀포 KAL Hotel, 2012
- 최형권, 강성우, 이상훈, 유정열, Monolithic 공식화를 이용한 유체-구조물 상호작용 해석, 대한기계학회 2012년도 유체공학부문 춘계학술강연회, 연세대학교 장기원 기념관, 2012
- Investigation of geometry effects on blood flow in flexible carotid artery bifurcation, APS 64th annual meeting of the division of fluid dynamics, 2011
- Numerical study on deformation and coalescence of droplets in a two-dimensional channel flow, APS 64th annual meeting of the division of fluid dynamics, 2011
- 열원을 포함하는 원형 실린더 주위의 복합 열전달의 수치해석, 대한기계학회 2011년도 추계학술대회 강연 및 논문 초록집, 2011
- 유연한 경동맥 분지관에서 분지각이 혈액의 유동에 미치는 영향에 관한 연구, 대한기계학회 2011년도 추계학술대회 논문집, 2011
- PC의 흡기 팬과 배기 팬의 위치가 CPU의 냉각 성능에 미치는 영향에 대한 실험 및 수치해석, 대한기계학회 2011년도 추계학술대회 강연 및 논문 초록집, 2011
- A numerical study on the entry problem of an elastic body using Level set method and combined formulation, AJK2011-FED, 2011
- Finite element simulation of blood flow in a flexible carotid artery bifurcation, AJK2011-FED, 2011
- 삼각형 요소와 사각형 요소에 기초한 상승기포의 모사를 위한 Level set 방법, 한국전산유체공학회 2011년도 춘계학술대회 논문집, 2011
- 2차원 채널유동에서의 액적 변형에 대한 수치해석적 연구, 한국전산유체공학회 2011년도 춘계학술대회 논문집, 2011
- 복합 열전달 해석에서 유한요소 해와 Ansys-Fluent 해의 비교, 한국전산유체공학회 2011년도 춘계학술대회 논문집, 2011
- 연속 뜸의 열자극에 대한 수치해석, 대한기계학회 2011년 유체공학부문 춘계학술대회 논문집, 2011
- 쑥뜸의 최대온도와 유효자극영역 깊이의 상관관게에 대한 수치해석 연구, 제6회 한국유체공학학술대회논문집, 2010
- level set 함수의 직접접근법을 활용한 상경계면의 처리기법, 제6회 한국유체공학학술대회논문집, 2010
- 경동맥 분지관과 혈류 유동의 상호작용에 관한 유한요소해석, 제6회 한국유체공학학술대회논문집, 2010
- 화상의 열전달 해석을 위한 비압축성 Navier-Stokes 방정식과 연성된 pennes bioheat 방정식의 유한요소해석, 제6회 한국유체공학학술대회논문집, 2010
- velocity-based p2/p1 finite element method for the analysis of unsteady fluid-structure interactions, 제6회 한국유체공학학술대회논문집, 2010
- combined finite element analysis of an entry problem of elastic body, 제6회 한국유체공학학술대회논문집, 2010
- 자유낙하하는 원형실린더의 항력-레이놀즈 수 관계식의 고찰, 대한기계학회 2010년 유체공학부문 춘계학술대회논문집, 2010
- 비정상 복합열전달 해법을 사용한 간접 뜸의 자극 효과에 대한 수치해석 연구, 대한기계학회 2010년 유체공학부문 춘계학술대회논문집, 2010
- level set방법과 결합공식화를 이용한 입수 문제의 수치해석 방법, 대한기계학회 2010년 유체공학부문 춘계학술대회논문집, 2010
- Finite element analysis of an entry problem using level set and combined finite element formulation, Proceedings of the abstracts of the 8th asian computational fluid dynamics conference, 2010
- Level set parallel finite element analysis of filling problems using the direct approach method, Proceedings of the abstracts of the 8th asian computational fluid dynamics conference, 2010
Patents
- 비정렬 격자계로 채워진 공간 내의 임의의 한 점에서 특정하게 정의된 면까지의 최단 거리 계산 방법, 특허 등록, 대한민국, 2017
Projects
- 수직 방풍펜스를 지나는 균일유동장의 수치해석에 관한 연구, 산학협력단, 2019.09.~2020.06.
- 비압축성 Navier-Stokes 방정식을 위한 병렬예조건인자의 계산 시간에 대한 연구, 산학협력단, 2019.03.~2020.02.
- 수직형 방풍 펜스의 다공율이 유동장에 미치는 영향의 수치해석, 산학협력단, 2018.08.~2019.07.
- 냉온 도자의 열전달 특성의 파악을 위한 도자와 햄/피부의 복합 열전달 해석, 산학협력단, 2018.01.~2018.12.
- A numerical study on the effect of trapezium stenosis shape on the axisymmetric flow field around stenosis, 산학협력단, 2017.07.~2018.06.
- 비정렬 격자계에 기반한 병렬 멀티그리드 및 특이점 처리 알고리즘을 이용한 적응격자 유한요소/level-set 프로그램의 개발, 한국연구재단, 2017.03.~2020.02.
- CUPID 코드의 부수로스케일 2상유동 해석 성능 향상 및 고속연산을 위한 Multi-Grid 알고리즘 개발, 한국연구재단, 2017.03.~2020.12.
- 필터의 다공률 조절을 통한 유동균일도 향상에 대한 수치해석, 산학협력단, 2015.12.~2016.11.
- CPVC 배관 동파방지용 열선의 위치 선정을 위한 비정상 열전달 수치해석, 산학협력단, 2015.10.~2016.03.
- 열선의 직선시공과 감기시공의 동파방지 효과 비교를 위한 3차원 비정상 수치해석, 산학협력단, 2015.05.~2016.03.
- 경혈별 온도 감각특성을 반영한 냉온자극 치료기 개발, 한국보건산업진흥원, 2014.12.~2015.11.
- 인버터 기동반의 열전달 예측을 위한 수치해석, 산학협력단, 2014.06.~2015.01.
- CFD를 통한 마이크로채널 열교환기 핀 설계, LG전자 주식회사, 2014.06.~2014.08.
- 표면장력이 지배적인 유동장의 해석을 위한 수정된 속도장과 표면장력의 완전내재적인 방법을 적용한 레벨셋 기법에 대한 연구, 한국연구재단, 2014.05.~2017.04.
- 다중의료영상을 활용한 3차원 초정밀 시뮬레이션 기반 심·혈관 질환 진단-치료지원 통합소프트웨어 시스템 개발, 정보통신기술진흥센터, 2014.05.~2017.02.
- 이더넷과 Infiniband 네트워크 기반의 분산 메모리 시스템에서 병렬 CUPID 코드의 성능 분석, 산학협력단, 2014.04.~2014.09.
- 열선이 설치된 소방용 배관 내부의 비정상 2차원 열전달 해석, 산학협력단, 2013.09.~2014.02.
- 탄두폭발모사 연구용역(프로그램 개발), 국방과학연구소, 2013.06.~2015.11.
- 다중의료영상을 활용한 3차원 초정밀 시뮬레이션 기반 심·혈관 질환 진단-치료지원 통합소프트웨어 시스템 개발<1차년도>, 한국산업기술평가관리원, 2013.05.~2014.04.
- 오일의 유량 변화와 오프셋 스트립 휜을 고려한 오일쿨러의 복합열전달 해석, 산학협력단, 2013.03.~2014.06.
- 산학과제-복합열 전달 해석 코드 개발, 한국지엠주식회사, 2012.05.~2013.03.
- 열전대의 온도측정 오차에 관한 복합열전달 수치해석, 산학협력단, 2012.05.~2013.04.
- 경혈 냉온자극 치료기 개발을 위한 시뮬레이션, 한국보건산업진흥원, 2011.12.~2014.11.
- 광조사기 핸드피스 열유동해석, 에이나인(주), 2011.09.~2011.11.
- 산학과제-복합열 전달 문제에 대한 해석코드 개발연구, 한국지엠주식회사, 2011.07.~2012.04.
- 태양광 트랙커 단축식 유동해석, (주)유일엔시스, 2011.06.~2011.08.
- 레이져 뜸 치료기의 열전달 수치해석, 동국대학교산학협력단, 2010.05.~2011.04.
- 산학과제-복합열 전달 문제에 대한 해석코드 개발, 지엠대우오토앤테크놀러지(주), 2010.04.~2011.03.
- Level Set 공식화와 결합 공식화를 이용한 탄성체 입수문제의 유한요소해석 코드의 개발, 한국연구재단, 2010.03.~2012.02.
수상
- ILU예조건화의 병렬연산을 위한 P2P1 유한요소의 Coloring기법의 개발, 대한기계학회논문집B권 최우수논문, KSME, 2020
- A numerical study of a new red-black format for the Gauss-Siedel method on structured grids, 우수발표논문상, KSCFE, 2020
- 온냉요법 임상실험으로부터 얻은 다양한 온도경계조건들에 대한 피부 내 수치해석, 2015년도 전국 대학생 유체공학 경진대회 장려상, 대한기계학회, 2015
- 오일의 유량 변화와 오프셋 스트립 휜을 고려한 오일쿨러의 복합열전달 해석, 제 25회 과학기술 우수논문상, 한국과학기술단체총연합회, 2015
- An Efficient Direct Redistance Technique of Level Set Method for Unstructured Meshes, AJK2015-FED KSME Best student paper award, ASME-JSME-KSME, 2015
- 배관 동파방지용 열선의 위치 선정을 위한 비정상 열전달 수치해석, 2013년도 전국 대학생 유체공학 경진대회 금상, 대한기계학회, 2013
- 근적외선 레이저의 열 자극에 대한 수치해석, 2013년도 전국 대학생 유체공학 경진대회 금상, 대한기계학회, 2013
- 유속 및 열전대 위치의 영향을 고려한 열경계층 내부의 복합열전달 해석, 대한기계학회 2012년도 전국 대학생 유체공학 경진대회 은상, 대한기계학회, 2012
- A Least-Square Weighted Residual Method for Level Set Formulation et al, 대한기계학회 남헌학술상, 대한기계학회, 2012
- 교내 우수교육상(2011학년도), 교내 우수교육상(2011학년도), 서울과학기술대학교, 2012
- PC의 흡기팬과 배기팬의 위치가 CPU의 냉각성능에 미치는 영향에 대한 실험 및 수치해석, 대한기계학회 2011년도 전국 대학생 유체공학 경진대회 은상, 대한기계학회, 2011