B.S. : Dongguk University, Civil Engineering, Korea (1977. 3 ～ 1980. 2)

M.S : Yonsei University, Civil Engineering, Korea (1980. 3 ～ 1982. 2)

Ph.D. : Yonsei University, Civil Engineering, Korea (1982. 3 ～ 1988. 2)

QUALIFICATIONS AND AWARDS: PhD, DIC - Thesis "Nonlinear Behaviour of Reinforced Beam and Column Connection Subject to Seismic Load
PE(Professional Engineers)on Construction Safety Management
MEMBERSHIP OF LEARNED SOCIETIES AND PROFESSIONAL BODIES:
1993: Registered Engineer in Korea. MICE Korea
1994: Member of American Society of Safety Engineers
1999:Committee Construction Safety Technology, Ministry of Labor, R.O.K
1999: Committee Design & Planning, Ministry of Defence Rook
2002:Committee Fire Prevention Design Ministry of Internal Affairs, R.O.K

Advanced Construction Quality & Safety

Advanced Construction Safety Design Theory

Computer Aided Temporary Analysis

Advanced Construction Safety Training Method

1)Ki Sang SON, “Plastic Design of Steel Structure Subject to Seismic Load”, , Spring Conference, April, 1982 Korea Institute of Architectural Engineering
2)Ki Sang SON, “Experimental Study on the Elasto Plastic Behaviour of RC Frame, , Autumn Conference, October, 1987, Korea Institute of Architectural Engineering
3)Ki Sang SON, “Check Model for Human Error in Structural Design”, Autumn Conference, November, 1992, Korea Institute of Industrial Safety
4)Ki Sang SON and a co-author, “Experimental Study on the Low-cost Repair for RC Structure”, Autumn Conference, November, 2000, Korea Institute of Industrial Safety
5)Ki Sang SON, “Experiment Study on the Concrete Section of Column with hole”, Autumn Conference, November, 2000, Korea Institute of Industrial Safety
6)Ki Sang SON and a co-author, “Economic Investigation for Safe work of Apartment Construction Process”, Autumn Conference, November, 2000, Korea Institute of Industrial Safety
7)Ki Sang SON and a co-author, “Anti-Noise-Material use against Noise Source in Construction”, Autumn Conference, November, 2000, Korea Institute of Industrial Safety
8)Ki Sang SON and a co-author, “Pointing out Problems with Safety Training in Construction”, Autumn Conference, November, 2000, Korea Institute of Industrial Safety
9)Ki Sang SON and a co-author, “Electrical Characteristic of the Concrete mixed with Recycled Waste-type”, Spring Conference, May, 2001, Korea Institute of Industrial Safety
10)Ki Sang SON and a co-author, “Vibration Decrease with Low-cost in Ready made concrete Piling”, Spring Conference, May, 2001, Korea Institute of Industrial Safety
11)Ki Sang SON and a co-author, “Column Strength Change with Hole”, Spring Conference, May, 2001, Korea Institute of Industrial Safety
12)Ki Sang SON and a co-author, “Comparison between the Estimated Amount and Actually Selected Amount of Work”, Spring Conference, May, 2001, Korea Institute of Industrial Safety
13)Ki Sang SON, “Strength Characteristic of the waste-tyre mixed Concrete Spring Conference”, May, 2001, Korea Institute of Industrial Safety
14)Ki Sang SON and a co-author, “Efficient Safety Training Technique in Construction”, Spring Conference, May, 2001, Korea Institute of Industrial Safety
15)Ki Sang SON and a co-author, “Safe Reorganization under Night Illumination in Construction Site”, Spring Conference, May, 2001, Korea Institute of Industrial Safety
16)Ki Sang SON and two co-authors, “Electrical Characteristic of the waste-tyre mixed Concrete long term Exposure”, Spring Conference, May, 2001, Korea Institute of Industrial Safety
17)Ki Sang SON and two co-authors, “Electrical Characteristic of the waste-tyre Mixed Concrete”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety
18)Ki Sang SON and a co-author, “Electrical Characteristic for Rebar Embedded in Concrete”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety
19) Ki Sang SON and a co-author, “Electrical Characteristic of Carbon-mixed Concrete”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety
20) Ki Sang SON and a co-author, “Electrical Characteristic of Steel Dust-mixed Concrete”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety
21) Ki Sang SON and a co-author, “Electrical Characteristic of Drink Can-mixed Concrete”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety
22) Ki Sang SON and a co-author, “Safety Problem Varying with Reconstructed Apartment Size”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety
23) Ki Sang SON and a co-author, “Analysis of Cracking Problems in RC Structure Building”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety
24) Ki Sang SON and two co-authors, “Heat Characteristic of Round Saw Work in Construction Site”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety
25) Ki Sang SON, “Interior Illumination Problem in Internet Plaza”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety
26) Ki Sang SON and a co-author, “Reorganization
27) Problem of Construction Safety Sign”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety
28) Ki Sang SON and a co-author, “Strength Characteristic of Drink can-mixed Concrete”, Autumn Conference, November, 2001, Korea Institute of Industrial Safety
29) Ki Sang SON and two co-authors, “Characteristic of waste tyre-mixed Concrete against Fire”, Autumn Conference, November, 2001, Korea Institute of Fire Science & Engineering
30) Ki Sang SON and a co-author, “ Modelling Safety Management System in Construction Work”, Autumn Conference, November, 2001, APSS, Vol 1
31) Ki Sang SON and a co-author, “Strength Change Varying with Enclosed Method Using Economic Material”, Autumn Conference, November 2001, APSS, Vol 2.
32) Ki Sang SON and two co-authors, “Characteristic of Drink can-mixed Concrete Varying with Temperature”, Spring Conference, May 2002, Korea Institute of Fire Science & Engineering
33) Ki Sang SON and a co-author, “Electrical Characteristic of Carbon-mixed Concrete long term exposure”, Spring Conference, May 2002, Korea Institute of Industrial Safety
34) Ki Sang SON and a co-author, “Electrical Characteristic of Steel Dust-mixed Concrete with long term Exposure”, Spring Conference, May 2002, Korea Institute of Industrial Safety
35) Ki Sang SON and a co-author, “Analysis of Correlation ship between Sunshine Rate and Falling Accident”, Spring Conference, May 2002, Korea Institute of Industrial Safety
36) Ki Sang SON and a co-author, “Study Solution for Worker in Construction”, Spring Conference, May 2002, Korea Institute of Industrial Safety
37) Ki Sang SON and a co-author, “Analysis of Correlation ship between colour on the warring sign and Accident in Construction Site”, Spring Conference, May 2002 November, 1992, Korea Institute of Industrial Safety
38) Ki Sang SON and a co-author, “Risk Assessment of Construction Work Using OHSAS 18001 System” ,Spring Conference, May 2002, Korea Institute of Industrial Safety
39) Ki Sang SON and a co-author, “Risk Analysis Using KOSHA 2000”, Spring Conference, May 2002, Korea Institute of Industrial Safety
40) Ki Sang SON and a co-author, “Application Method Using Fault Tree Analysis for Construction Work”, Spring Conference, May 2002, Korea Institute of Industrial Safety
41) Ki Sang SON and a co-author, “Economic Noise Decrease in the Building Construction Area”, Spring Conference, May 2002, Korea Institute of Industrial Safety
42) Ki Sang SON and a co-author, “Safety Ensuring Technique in Road Construction”, Spring Conference, May 2002, Korea Institute of Industrial Safety
43) Ki Sang SON and two co-authors, “Problem in Establishing OHSAS 18001 for Small work Place with less than 50 Workers”, Spring Conference, May 2002, Korea Institute of Industrial Safety
44) Ki Sang SON and a co-author, “Problem in Application OHSAS 18001 In Road Construction”, Spring Conference, May 2002, Korea Institute of Industrial Safety
45) Ki Sang SON and a co-author, “Fire Characteristic of Carbon-mixed Varying with Temperature”, Spring Conference, May 2002, Korea Institute of Industrial Safety
46) Ki Sang SON and a co-author, “ Fire Characteristic of steel Dust Varying with Temperature”, Spring Conference, May 2002, Korea Institute of Industrial Safety
47) Ki Sang SON and a co-author, “Strength Change due to Temperature of Crashed Drink Bottle Mixing Concrete”, Autumn Conference, November, 2002, Korea Institute of Fire Science & Engineering
48) Ki Sang SON and a co-author, “Strength Characteristic of Drink can-mixed Concrete”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
49) Ki Sang SON and a co-author, “Problem and Solution for Female Workers in Construction Field ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
50) Ki Sang SON and a co-author, “Strength Characteristic of Drink Bottle Particle ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
51) Ki Sang SON and a co-author, “Safety Effect due to Material Procurement Method varying with Apartment Building Scale ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
52) Ki Sang SON and a co-author, “Factor by Factor Analysis of Man-made Accident ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
53) Ki Sang SON and a co-author, “Operation Problem and its Safety of the Bridge Construction Equipment ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
54) Ki Sang SON and a co-author, “Forecasting Analysis for the Level of Accident Occurrence in the Road Construction”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
55) Ki Sang SON and a co-author, “Test on the in Apartment Building ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
56) Ki Sang SON and a co-author, “Effective Maintenance Method for School Safety ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
57) Ki Sang SON and a co-author, “Electrical Characteristic of Long-term Exposed Concrete Mixed with Drink Can Particle ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
58) Ki Sang SON and a co-author, “Problem Accident Inducement due to Stress of Construction workers ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
59) Ki Sang SON and a co-author, “Characteristic of the Concrete Strength Mixed with P.P Band Fibre ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
60) Ki Sang SON and a co-author, “Construction Safety Effect due to Environmental Contamination ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
61) Ki Sang SON and a co-author, “Relation Between Accident and Competent Material Procurement Method in Construction Field ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
62) Ki Sang SON and a co-author, “Passenger-Accident Prevention during Express Railway Operation in Korea ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
63) Ki Sang SON and a co-author, “Investigation on the Accident Cause due to Look but don’t See on the Road ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
64) Ki Sang SON and a co-author, “Safety Sign Application for Accident Prevention in Construction Site Varying with its Colour ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
65) Ki Sang SON and a co-author, “Safety Effect of School Building and Perimeter Facilities ”, Autumn Conference, November, 2002, Korea Institute of Industrial Safety
66) Ki Sang SON and four co-author, “Inspect Analysis of Each man-made Accident Factor at Atomic Energy power plant”, Autumn Conference, 28 March, 2003, Spring conference Korea Institute of Risk Managenent
67) Ki Sang SON and two co-author, “Non-ground Electrical Circuit for Movable Low volt Generator at Construction Site”:, 16 May 2003, Spring Conference Korea Institute of Industrial Safety
68) Ki Sang SON and a co-author, “ Social Cost on the Accident Occurrence at Office Building Construction”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety
69) Ki Sang SON and a co-author, “ Social Cost on the Accident at Apartment Building Construction ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety
70) Ki Sang SON and a co-author, “ Social Cost on the Accident Occurrence at Office Building Construction”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety
71) Ki Sang SON and a co-author, “ Correlation between Accident Occurrence and Workshop Frequency at Steelwork ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety
72) Ki Sang SON and a co-author, “ Impact to the prevention of worker’s audient by Safety Training for Lift Operation ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety
73) Ki Sang SON and a co-author, “ Support Condition Safety of the Lowest Level of Bridge Slab Form ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety
74) Ki Sang SON and a co-author, “An Efficiency on Safety Traing for Round Open well Caisson of Bridgework ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety
75) Ki Sang SON and a co-author, “ Safety of Double deck Bridge Work ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety
76) Ki Sang SON and a co-author, “Accidents under the Finishing work of Department Store ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety
77) Ki Sang SON and two co-author, “ Vibration cut Mechanism of Excavation Terench Cut ”, 16 May 2003, Spring Conference Korea Institute of Industrial Safety
78) Ki Sang SON and two co-author, “Risk Analysis on the Remaining Life of the Existing Building”, 23 May 2003, Safety Management Science
79) Ki Sang SON and a co-author, “Maintence Cost Reasonability of the Existing Bridge ”, 23 May 2003, Safety Management Science
80) Ki Sang SON and a co-author, “Establishment of Safety Intensity decides by field safety Manager ”, 23 May 2003, Safety Management Science
81) Ki Sang SON and a co-author, “Look but Don’t See of Non-Professional Driver”, 23 May 2003, Safety Management Science
82) Ki Sang SON and a co-author, “Carpenter’s Human Error at Construction Site”, 23 May 2003, Safety Management Science
83) Ki Sang SON and a co-author, “Safety of Low Volt Generator –Portable at a Construction Site”, 31 October 2003, Korea Institute of Industrial Spring Session
84) Ki Sang SON and a co-author, “Fine Recognition at a Construction Site”, 31 October 2003, Korea Institute of Industrial Spring Session
85) Ki Sang SON and a co-author, “Potential Hazard during Night Work at a Construction Site”, 31 October 2003, Korea Institute of Industrial Spring Session
86) Ki Sang SON and won mo KAL, “Investigation on the Human Error of Carpenter at Construction Site”, Asia-pacitic Symposium on Safety(APSS) in Taipei, 18-20, November 2003
87) Ki Sang SON and won mo KAL, “Investigation on the Accident due to Construction Worker’s Stress”, Asia-pacitic Symposium on Safety(APSS) in Taipei, 18-20, November 2003
88) Ki Sang SON and Jae Nam CHOI and won mo KAL ,“Impact of Environmental Problem in Construction Site”, Asia-pacitic Symposium on Safety(APSS) in Taipei, 18-20, November 2003
89) Ki Sang SON and Jung Bong PARK and Young Kyun YANG, “Formulation for Cutting Earth Vibration using Trench Cut in Construction Site”, Asia-pacitic Symposium on Safety(APSS) in Taipei, 18-20, November 2003
90) Ki Sang SON and Sang Ha BAE and Yoon Hang CHO, “Settlement of the Bearing Steel Plate with Pipe Support for Road Construction”, Asia-pacitic Symposium on Safety(APSS) in Taipei, 18-20, November 2003
91) Ki Sang SON and Hak Soo YANG, “Investigation on Safety Security Techniques by Type of an Expressway Construction Disater”, Asia-pacitic Symposium on Safety(APSS) in Taipei, 18-20, November 2003
92) Ki Sang SON and Won Kyun LEE, “Investigation on the accident for finishing work at Departmentstore”, Asia-pacitic Symposium on Safety(APSS) in Taipei, 18-20, November 2003
93) Ki Sang SON and Kyung Tae PARk, “An Effect on the Work Process due to Death Accident with Relation to the Construction of Apartment Building”, Asia-pacitic Symposium on Safety(APSS) in Taipei, 18-20, November 2003
94) Ki Sang SON and Yong Ho CHOI, “An Efficiency of Safety Training for Lift Operation Safety against Accident”, Asia-pacitic Symposium on Safety(APSS) in Taipei, 18-20, November 2003
95) Ki Sang SON and Soo Kyung Lee, “Temperature Effect of Concrete Strength Properties Mixing with Waste Aluminum Drink Can”, 18 March 2004, 6th Asia Oceanian Symposium on Fire Science and Technology, Korea
96) Ki Sang SON and another, “Basic Study on Improving KOSHA18001”, 30th April 2004, Korea Society of Safety Spring Session
97) Ki Sang SON and another, “Noise reducing idea against a large breaker at Work for urban Apartment Building”, 30th April 2004, Korea Society of Safety Spring Session
98) Ki Sang SON and another, “Investigation on Hazards for Temporary work”, 30th April 2004, Korea Society of Safety Spring Session
99) Ki Sang SON and other two authors, “Effect varying with Waste-tire mixing ratio by each Concrete mixed with Saw dust”, 30th April 2004, Korea Society of Safety Spring Session
100) Ki Sang SON and other two authors, “Experimental Study of Strength Characteristic of light weight Concrete mixed with Saw dust”, 30th April 2004, Korea Society of Safety Spring Session
101) Ki Sang SON and other two authors, “Characteristic of Concrete Structure mixed with granular Fiber Particle”, 21th Oct 2004, Korea Society of Safety Autumn Session
102) Ki Sang SON and other two authors, “Strength Characteristic of Waste tire-mixing Concrete”, 21th Oct 2004, Korea Society of Safety Autumn Session
103) Ki Sang SON and another, “ Foreign workers Safety at Construction site”, 21th Oct 2004, Korea Society of Safety Autumn Session
104) Ki Sang SON and other two authors, “Strength valuation of existing building using Core-sampled mold”, 21th Oct 2004, Korea Society of Safety Autumn Session
105) Ki Sang SON , “Correlation between Accident occurring rate and contract price in proportion to Estimated cost”, 25-28th Oct 2004, International Symposium on Safety Science and Technology, Shanghai China
106) Ki Sang SON and other six authors, “Establishing warning System for the Occurrence of industrial Safety”, 29th April 2005, Korea Society of Safety Spring session
107) Ki Sang SON and another, “Safety management of Construction subcontractors using quantified index”, 29th April 2005, Korea Society of Safety Spring session
108) Ki Sang SON and other five authors, “Reestablishment of qualification System for industrial Safety engineer”, 29th April 2005, Korea Society of Safety Spring session
109) Ki Sang SON and another, “Comparison of Flexural Strength mixed with coarse waste tire Particle”, 29th April 2005, Korea Society of Safety Spring session
110) Ki Sang SON and other two authors, “Structural Strength of Saw dust-mixing Concrete”, 29th April 2005, Korea Society of Safety Spring session
111) Ki Sang SON and another, “Experimental Study on Compressive Strain of Concrete Column with hole”, 29th April 2005, Korea Society of Safety Spring session
112) Ki Sang SON and other two authors, “Insulation Characteristic of Saw dust-mixing Concrete”, 29th April 2005, Korea Society of Safety Spring session
113) Ki Sang SON and another, “Structural behaviour of Sawdust-mixing Concrete with hole”, 29th April 2005, Korea Society of Safety Spring session
114) Ki Sang SON and other three authors, “Effect of organic Solvent coming from Painting work in enclosed Space”, 29th April 2005, Korea Society of Safety Spring session
115) Ki Sang SON and other two authors, “Experimental study on Capacity loss of Column varying with hole Configuration”, 29th April 2005, Korea Society of Safety Spring session
116) Ki Sang SON and other three authors, “Hazard evaluation for the Construction work by worker on experience”, 29th April 2005, Korea Society of Safety Spring session
117) Ki Sang SON other two authors, “Accident-occurring frequency of Construction workers with arthritis”, 29th April 2005, Korea Society of Safety Spring session
118) Ki Sang SON and another, “Application problem of Safety Management costs based on Question & Answer”, 21th May 2005, Korea Institute for Safety Management and Science Spring session
119) Ki Sang SON and other four authors, “Evaluation of hazard in harmful work”, 21th May 2005, Korea Institute for Safety Management and Science Spring session
120) Ki Sang SON and other four authors, “Evaluation of hazardous work task in Industry”, 21th May 2005, Korea Institute for Safety Management and Science Spring session
121) Ki Sang SON and other five authors, “Reasonability of measuring hazardous of Construction Safety manager”, 21th May 2005, Korea Institute for Safety Management and Science Spring session
122) Ki Sang SON and other two authors, “Structural Applicability of Saw dust-mixing Concrete”, 21th May 2005, Korea Institute for Safety Management and Science Spring session
123) Ki Sang SON and other two authors, “Characteristic of fore temperature of Saw dust-mixing Concrete”, 27th May 2005, Korea Institute for Fire Safety and Technology Spring session
124) Ki Sang SON and other 5 another, “Effectiveness of safety cost-calculating rate vary with work size in civil field”, 6th Oct 2005 Korea Society of Safety Autumn Session
125) Ki Sang SON and Yong Chan NA, “A study on scaffolding with low costs at construction field”, 6th Oct 2005 Korea Society of Safety Autumn Session
126) Ki Sang SON and Yoo Taek Kim, “Correlation between national and private accident statistics of construction industry”, 6th Oct 2005 Korea Society of Safety Autumn Session
127) Ki Sang SON and Eu Sik KIM, “Safety check status in domestic construction field”, 6th Oct 2005 Korea Society of Safety Autumn Session
128) Ki Sang SON and Chang Heon CHUN, “Analysis glass web and steel flange-composing beam”, 6th Oct 2005 Korea Society of Safety Autumn Session
129) Ki Sang SON and Eun Sok Lim and Min Lae NO, “A base on of subway maintenance accident predict the accident possibility after long time”, 6th Oct 2005 Korea Society of Safety Autumn Session
130) Ki Sang SON and Yong Ho CHIO and Hak Soo YANG, “Accident of foreign workers at construction sites”, 6th Oct 2005 International Symposium on Safety Engineering-2nd
131) Ki Sang SON and Mi Jin KANG and Yong Soon LEE and Jung Woo LEE, “Organic solvent due to painting work in enclosed space”, 2th Nov Asia Pacipic Symposium on Safety 2005
132) Ki Sang SON and Byung Heon CHO, “Risk evaluation for construction work with a stand point of labor”, 2th Nov Asia Pacipic Symposium on Safety 2005
133) Ki Sang SON and Kyung Tae PARK, “Study on Application of KOSHA18001 to construction Firms”, 2th Nov Asia Pacipic Symposium on Safety 2005
134) Ki Sang SON and Tae Yeon KIM and Jung Sok PARK, “Investigation on workers exposition to construction hazard”, 2th Nov Asia Pacipic Symposium on Safety 2005
135) Ki Sang SON and Won Kyun LEE, “Risistant capacity of waste tire mixing concrete beam”, 2th Nov Asia Pacipic Symposium on Safety 2005
136) Ki Sang SON and Jung Bong PARK, “Study on determination of cooperating charge through wave form analysis and FFT analysis in MS blasting”, 2th Nov Asia Pacipic Symposium on Safety 2005
137) Ki Sang SON and Jung Sok PARK and Tae Yon KIM, “Safety management for construction using intensity index against hazard exposition”, 2th Nov Asia Pacipic Symposium on Safety 2005
138) Ki Sang SON and Hak Soo YANG, “Analysis of foreign worker control effectiveness”, 2th Nov Asia Pacipic Symposium on Safety 2005
139) Ki Sang SON and Jae Nam CHOI, “Insulation behavior of saw dust concrete”, 2th Nov Asia Pacipic Symposium on Safety 2005
140) Ki Sang SON Chang Hyun CHUN, “Capacity loss of RC concrete column with holes”, 2th Nov Asia Pacipic Symposium on Safety 2005
141) Ki Sang SON and Yong Ho CHOI, “Experimental study on the property change by strength of concrete mixed with waste tyre chips”, 2th Nov Asia Pacipic Symposium on Safety 2005
142) Ki Sang SON and Byung Heon CHO, “Structural property of sawdust concrete”, 2th Nov Asia Pacipic Symposium on Safety 2005
143) Ki Sang SON and Hak Soo KANG, “Risk analysis of civil work using AHP technique”, 2th Nov Asia Pacipic Symposium on Safety 2005
144) Ki Sang SON and Byung Heon CHO, “Fire resistant capacity of paper-mixed concrete”, pp 397-406, conference, spring session, Korea safety science and Business institute
145) Ki Sang SON and Byung Heon CHO, “Insulation properties of paper-mixed concrete” pp 155-163, Spring session conference, Korea society of safety, 2006
146) Ki Sang SON and Chang Hyon CHUN, “analysis of the behaviour of glass web-steel flange beam”, pp 170-174, Spring session conference, Korea society of safety, 2006
147) Ki Sang SON and Byung Heon CHO, “Structural propertyes of wastepaper-mixed concrete”, pp 182-188, Spring session conference, Korea society of safety, 2006
148) Ki Sang SON and Ki Hong PARK, “Diagnostic system for fire reasons”, pp 346-353, Spring session conference, Korea society of safety, 2006
149) Ki Sang SON and Kyung Ja CHUNG, “Visibity Variance by colored worker clothes at construction site”, pp 346-353, Spring session conference, Korea society of safety, 2006
150) Ki Sang SON and Eun Gi LEE, “Potential danger points in film-making facilities”, pp 497-502, Spring session conference, Korea society of safety, 2006
151) Ki Sang SON and Hak Soo YANG, Hyun Seop YOON, “Establishing risk level varying with bridge construction method”, pp315-321, Spring session conference, Korea society of safety, 2006
152) Ki Sang SON and Yong Seung KIM, “Ensuring construction safety of sub contracted system”, pp 322-327, Spring session conference, Korea society of safety, 2006
153) Ki Sang SON and other-five authers, “Establishing safety management cost rate for building work”, pp 503-506, Spring session conference, Korea society of safety, 2006
154) Ki Sang SON and Hak Soo YANG, Soo Hon KANG, “Establishing efficient safety policy for small size enterprise” , pp 333-339, Spring session conference, Korea society of safety, 2006
155) Ki Sang SON and and other six authors, “Standardization for managing facility and building maintenance”, pp 424-429, Spring session conference, Korea society of safety, 2006
156) Eun Seok LIM, Ki Sang SON, Young Guk KWON, “muscle skeleton problem of maintenance shop worker for subway Vehicle”, pp 117-122, Autumn Session, Korea Institute of Safety, 2006. 11. 9 Korea
157) Ki Sang SON, Hak Soo YANG, “ Evaluation of risk level for Construction Project”, pp2119-2124, 19th Oct, 2006, Portugal
158) Gi Tae Lee, Ki Sang SON, “Improvement of preventive measure for small sized Construction Sites”, pp 155-163, Changsa, China ISSST, 2006
159) Ki Sang SON, Hak Soo YANG , Alfredo SERPELL, “Reasonable Safety management Cost for housing Construction”, pp1423-1428 Vol2), Safety and reliability Conference, 25-27 June 2007, Seravanger, Norway
160) Ki Sang SON, Young Gyun YANG, Kypros PILAKOUTAS, “Use of trenches to reduce ground Vibrations due to Concrete piling”. pp2241-2244 Vol3 , Safety and reliability Conference, 25-27 June 2007, Seravanger, Norway
161) Ki Sang SON, “Appropriate rate by accident intensity at a Construction site”, pp421-426 , spring Session Conference, Korea Institute of Safety, April 2007
162) Ki Sang SON, Hyun Sang SHIN, Hak Soo YANG, “Improving employment rate of engineering student”, pp122-127 , Spring Session Conference, Korea Institute of Safety, April 2007
163) Ki Sang SON, Jae Nam Choi, “behaviour of steel scaffolding frame due to Seismic load”, pp439-444 , Spring Session Conference, Korea Institute of Safety, April 2007
164) Seung Don KIM, Ki Sang SON, “An analysis by types of Children accident”, pp159-164, Spring Session Conference, Korea Institute of Safety, April 2007
165) Jeong Jin PARK, KiSang SON, “Capacity of steel Scaffolding with truss”, pp99-103, Spring Session Conference, Korea Institute of Safety, April 2007
166) SeungDon KIM, KiSang SON, “A Study of Migration of Heavy Metals and Formaldehyde in Toy Goods”, pp114-118, Spring Session Conference, Journal of Korea Society of Safety 2008, Korea, 2008
167) Ki Sang SON , K.Pilakoutas , K. Neo Cleous , “Behavior of Concrete Columns with Drilled Holes”, Vol 58 No 9 magazine of concrete research , 2006
168) Young Chan NA , Ki Sang SON , “An Experimental Study on resisting force of Scaffolding frames using buckled pipe”, pp 24-28, International journal of Safety, Korea Institute of Safety Vol 5, NO 2 , 2006
169) Ki Sang SON, Hak Soo YANG, K. Pilalkoutas , “Use of Trenches to Reduce Ground Vibrations Induced by Construction Sites”, ESREL 2007 Vol 3, 2007
170) Ki Sang SON, Hak Soo YANG, Alfredo Serpell , “Reasonable Safety Management Cost for Housing Construction”, ESREL 2007 Vol 2 , 2007
171) Jeong Jin PARK, KiSang SON, “Efficient Safety Management for Subcontractor at Construction Sites”, ESREL 2008 Vol , 2008
172) Yong Tag KANG, KiSang SON and Chang Eun KIM “Preventing Accidents at Construction Sites by means of a worker's Astrology forecast”, ISSST 2008 Vol 7 Part B pp2284 ~ 2286
173) Ki Sang SON, SeoungYoung LEE, “Making an Insulation Mortar Material that is mixed with Paper and Sawdust”, ISSST 2008 Vol 7 Part B pp2407 ~ 2410
174) Jeong Jin PARK, KiSang SON, “Characteristic of Mortar-Containing Waste Tyre Powders and Flame Retardant”, ISSST 2008 Vol 7 Part A pp966 ~ 969
175) Ki Sang SON, “Establishing an Accountability Rate For Construction Accidents”, ISSST 2008 Vol 7 Part B pp2287 ~ 2289
176) Ki Sang SON, Seong Ho KI, Seung Young LEE, Seong Lae KIM, Se Hwa SONG, “A Study on the Safety Assessment based on the Risk for the Construction Works”, pp253-257, Fall Conference of the Korean Society of Safety, 2009
177) Ki Sang SON, Won Mo GAL, Jae Nam CHOI, “Improving Assignment and Qualification of Safety Manager at Construction sites”, pp779-784, ESREL2010. 2009

1)Ki Sang SON, “ Quantification for the Analysis of Construction Safety Level”, Korea Institute of Industrial Safety, Vol. 7, No.3, September 1992
2)Ki Sang SON, “ Safe Resistant Capacity of Trapezoidal Web Steel Beam with Opening”, Korea Institute of Industrial Safety, Vol. 7, No.4, December 1992
3)Ki Sang SON, “ Computer Programming for the Analysis of Form Structure System”, Korea Institute of Industrial Safety, Vol. 8, No.1, March 1993
4)Ki Sang SON, “ Static Structure Analysis of Scaffolding System for Temporary Work”, Korea Institute of Industrial Safety, Vol. 8, No.2, June 1993
5)Ki Sang SON, “ Human Error Check in Structural Design”, Korea Institute of Industrial Safety, Vol. 8, No.3, December 1992
6)Ki Sang SON, “ Quantification for the Analysis of Building Collapsion”, Korea Institute of Industrial Safety, Vol. 9, No., March 1994
7)Ki Sang SON, “ Computer Simulation to Check Environmental Contamination Limit”, Korea Institute of Industrial Safety, Vol. 11, No.3, September 1995
8)Ki Sang SON, “ Quantification for the Analysis of Construction Safety Level in Underground Construction Work Using TOPDOWN Technique”, Korea Institute of Industrial Safety, Vol. 1, No.3, September 1995
9)Ki Sang SON and two co-authors, “ Shear Capacity of the Steel Beam Web with Opening”, Korea Institute of Industrial Safety, Vol. 11, No.1, October 1995
10)Ki Sang SON a co-author, “ Establishing Standard Concerning Bracket’s to Support Scaffold”, Korea Institute of Industrial Safety, Vol.12, No4, December 1995
11)Ki Sang SON a co-author, “ Shear Capacity of Folding Web Steel Beam”, Korea Institute of Architectural Engineering, Vol. 16, No.3, March 1996
12)Ki Sang SON and two co-authors, “ Analysis of Safety Control Effectiveness in Construction”, Korea Institute of Industrial Safety, March 1996
13)Ki Sang SON and two co-authors, “ Eccentric Behaviour of Steel Structure due to Seismic Load”, 11th World Conference for Earthquake Engineering, Mexico, June 1996
14)Ki Sang SON, “ Effectiveness of Safety Net in Construction Site”, Korea Institute of Architectural Engineering, Vol. 14, No.9, September 1998
15)Ki Sang SON, “ An Experimental Study on the Durability of Galvanized Steel Pipe Support Depending On Used Period”, Korea Institute of Architectural Engineering, Vol. 14, No.9, November 1998
16)Ki Sang SON, “ Estimation Technique on Safety Skill of Steel Structure Plant Based on Accident Rate”, Korea Institute of Industrial Safety, Vol. 14, No.13, December 1998
17)Ki Sang SON, “ Quantifying Practical Application for Specialized Course on Temporary Work Safety”, Korea Institute of Industrial Safety, Vol. 15, No.1, March 1999
18) Ki Sang SON, “ Safety Accident of Stairway for cased on Stairway Design”, Korea Institute of Facility Management, Vol. 2, No.1, January 2000
19) Ki Sang SON and two co-authors, “ Practical Study on the Safety Management Technique”, Korea Institute of Safety Management, Vol. 2, No.1, March 2000
20) Ki Sang SON and two co-authors, “ Improving Self-Safety Control Capacity of Construction Safety”, Korea Institute of Industrial Safety, Vol. 15, No.4, December 2000
21) Ki Sang SON and two co-authors, “ Preliminary Safety-Ensuring Method for Construction Safety”, Korea Institute of Industrial Safety, Vol. 15, No.4, December 2000
22) Ki Sang SON and two co-authors, “ An Experimental Study on the Correlation ship between Hise-rised Safety guard and Worker’s Safety”, Korea Institute of Safety Management, Vol. 16, No 2, June 2001
23) Ki Sang SON, “ Experimental Study on the Behaviour of Paulo Circular Concrete Column”, Korea Institute of Industrial Safety, Vol. 16, No.3, September 2001
24) Ki Sang SON, “ Concrete Reinforcement Using P.P Band”, Korea Institute of Industrial Safety”, Vol. 6, No.5, December 2001
25) Ki Sang SON and a co-author, “ Ensuring Safety Level with and Efficient Model in Construction Management System, Vol. 6, No.5, December 2001
26) Ki Sang SON, “ The Relationship between Leisure Functioning and Community Leisure Program Participants of the Housewives of Dance sports Participants in Seoul”, Korea Alliance for Health, Physical Education, Vol. 40, No 4, December 2001
27) Ki Sang SON and a co-author, “ Effectiveness Check of Gang form Work Using Fault-Tree Analysis”, Korea Institute of Industrial Safety, Vol. 17, No.1, March 2002
28) Ki Sang SON and tow co-authors, “ A Study of Comparative Evaluation for Hise Rise Building Fire Risk by the use of FREM”, Korea Institute of Fire Science & Engineering, Vol. 16, No.1, April 2002
29) Ki Sang SON, “ A Strength Change of the Concrete Mixed with Waste tyre due to Fire”, Korea Institute of Industrial Fire Science & Engineering, Vol. 16, No.1, April 2002
30) Ki Sang SON and a co-author, “ An Analysis of Safety Control Effectiveness”, RE & SS, Vol. 68, June 2000
31) Ki Sang SON, “ Reducing Noise Problem of Excavation Work in Urban Area”, Vol. 17, No. 3, Korea Institute of Industrial Safety, Sept 30, 2002
32) Ki Sang SON, “ Strength Change of Concrete Mixed with Waste tire Particle”, Vol. 19, No. 1, Korea Institute of Industrial Safety, March 31, 2003
33) Ki Sang SON and Tae Mo SHIN and Yon Seok JUNG and Young Soon Lee and Chang Jin Lee, “ Analysis of Factors Related to man-Induced Hazard for Nuclear Facilities”, pp 135-172, Vol. 14, No. 2, Korea Institute of Risk Management, 2003
34) Ki Sang SON and Ali A.Notazar and K.Pilakiutas, “ R.C Calumn Strengthening by Lateral Pre-tensioning of FRP”, pp 491-497, Vol. 17, No. 6&7, Construction & Building Material(SCI), August , 2003
35) Ki Sang SON and another, “Establishing reasonable lighting Criteria for Safe night work”, Journal of Korea Society of Safety, Vol 19. No 3, Sept 2004,
36) Ki Sang SON and another, “Case study of KOSHA18001 for Construction Industry”, Journal of Korea Society of Safety, Vol 19. No 4, Dec 2004
37) Ki Sang SON and another, “Analysis of accident hazard in arranging Foreign workers at Construction site”, Journal of Korea Society of Safety, Vol 20. No 1, Dec 2005
38) Ki Sang SON and another, “Strength Characteristic of the Concrete mixed with Waste tire Particle”, Journal of Korea Society of Safety, Vol 21. No 2, Dec 2005
39) Ki Sang SON and another, "Analysis of accident hazard in arranging Foreign workers at Construction site", Journal of Korea Society of Safety, Vol 20. No 1, Mar 2005
40) Ki Sang SON, "Strength Characteristic of the Concrete mixed with Waste tire Particle", Journal of Korea Society of Safety, Vol 20. No 2, June 2005
41) Seung Ryal HONG and Byung Heon CHO and Ki Sang SON", "Insulation Characteristic of Waste Sawdust-mixing Concrete", Journal of Korea Society of Safety, Vol 20. No 2, June 2005
42) Jae Nam CHOI and Ki Sang SON, "An Adiabatic Characteristic on the Waste tyre Powder-containing mortar", Journal of Korea Society of Safety, Vol 20. No 2, June 2005
43) Seung Ryall HONG and Ki Sang SON, "Structural behaviour of Sawdust-mixing Concrete", Journal of Korea Society of Safety, Vol 20. No 3, Sept 2005
44) Joung Woo LEE and Ki Sang SON, "Measurement of organic Solvent from painting work inside the steel box", Journal of Korea Society of Safety, Vol 20. No 3, Sept 2005
45) Jae Hyung LEE and Ki Sang SON, "Temperature Strength of Sawdust-mixing Concrete", Journal of Korea Society of Safety, Vol 20. No 4, Dec 2005
46) Won Kyun LEE and Ki Sang SON, "Experimental study on the Capacity of Holed RC beam mixed with Waste tire Particles", Journal of Korea Society of Safety, Vol 20. No 4, Dec 2005
47) Ki Sang SON, “Capacity of RC Concrete Column with Holes”, pp 92-95, Journal of Korea Society of Safety, Vol 21. No 1, 2006
48) Ki Sang SON and Jae Hyung LEE, “Structural behavior of holed RC Beam mixed with sawdust”, pp 96-104, Journal of Korea Society of Safety, Vol 21. No 1, 2006
49) Ki Sang SON, “Stress change varying with hole place of RC column”, pp 70-79, Journal of Korea Society of Safety, Vol 21. No 2, 2006
50) Ki Sang SON and Shin Jae LEE, “Risk Assessment for hazardous construction work recognized by workers”, , Journal of Korea Society of Safety, Vol 21. No 3, 2006
51) Ki Sang SON and Chang Heon CHUN, “A study on resisting force of H-shaped beam using glass web plate”, , Journal of Korea Society of Safety, Vol 21. No 3, 2006
52) Ki Sang SON, Gi Tae LEE, Jong Gun PARK, Jeong Bong PARK, “Appropriate Rate for estimating Safety management Cost in Civil work”, pp 73-84, Vol 21. No 4, Korea Institute of Safety, August 2006
53) Ki Sang SON , Hak soo YANG, Won Mo KAL, “Estimating relative risk level of Construction Work”, pp53-59, Vol 21, No5, Korea Institute of Safety, October, 2006
54) Ki Sang SON, Kypros PILAKOUTAS, K..Neocleous,”Behavior of Concrete Columns with drilled holes”, Vol 58, No.9, Magazine of Concrete Research , Sep 2006, UK
55) Young Chan NA, Ki Sang SON, “An Experimental Study on resisting force of Scaffolding frames using buckled Pipe”, pp 24-28, Vol 5, No 2, International Journal of Safety, Korea Institute of Safety, December 2006
56) Ki Sang SON, Won Mo GAL, Hak Soo YANG, “A study on the estimating rate of safety management cost in building work”, pp33-40, Journal of Korea Society of Safety, Vol 22, No 5, Korea Oct 2007
57) Ki Sang SON, Seung Young LEE, “Consciousness of Safety Engineer for Foreign Workers at a Construction Site”, pp41-48, Journal of Safety management and Science, Vol 10, No 1, Korea, March 2008
58) Won Mo GAL, Ki Sang SON, Jea Nam CHOI, “Improving Qualification of Safety Manager at Construction Site”, pp111-115, Journal of Safety Management and Science, Vol 11, No 2, Korea, June 2009
59) Ki Sang SON, Won Mo GAL, Jea Nam CHOI, “Formulation to Produce Safety engineering by Project Amount Assigned to Construction site”, pp25-31, Journal of the Korean Society of Safety, Vol 24, No 3, Korea, June, 2009
60) Ki Sang SON, Kyung Yong RHEE, Won Mo GAL, “Analysis Techniques for Accident Causes of Subcontract Work at Construction Site”, pp34-42, Journal of the Korean Society of Safety, Vol 24, No 5, Korea, October, 2009
61) Jin Woo SUNG, Ki Sang SON, “Consciousness of Drivers Concerning Pseudo petroleum and the Status in Gimpo Area”, pp63-69, Journal of Safety Management and Science, Vol 12, No 1, Korea, March 2010
62) Se Hwa HONG, Ki Sang SON, Jea Nam CHOI, “A Experimental Study on Construction Material Using the Circulation Resources”, pp41-46, Journal of the Korean Society of Safety, Vol 25, No 2, Korea, April 2010
63) Seung Young LEE, Ki Sang SON, “Making the Insulation Mortar Mixed with Waste paper and Sawdust”, pp78-82, Journal of the Korean Society of Safety, Vol 25, No 3, Korea, June 2010
64) Jeong Jin PARK, Ki Sang SON, “Research on Fire Safety of Mortar-Containing Waste Tire Powders and Flame Retardant”, pp. 12~17, Journal of Korean Institute of Fire Science and Engineering, Vol 24, No0 4, Korea, August, 2010
65) Ki Sang SON, Won Mo GAL, In Yong SONG, Jea Nam CHOI, “Formulation for Producing Risk Level of Each Construction Work”, pp. 13~19, Journal of Safety Management and Science, Vol 12, No. 3, Korea, September, 2010
66) Jea Nam CHOI, Se Hwa HONG, Ki Sang SON, “Experimental Study on Fire Resistant Capacity and Thermal Conduction of Construction Material Using the Circulation Resources”, pp. 121~128, Journal of Safety Management and Science, Vol 12, No. 3, Korea, September, 2010
67) Seung Don KIM, Ki Sang SON, “A Study on the Toys Assessment of Harmful Substances and Control”, pp. 27~32, Journal of the Korean Society of Safety, Vol 25, No 5, Korea, October, 2010
68) Ki Sang SON, Jeong Jin PARK, “Structural analysis of Steel pipe scaffolding based on Tightening Strength of Cramp”, pp. 479~485, Journal of Asian Architecture and Building Engineering, Vol 9, No 2, Japan, November, 2010
69) Ki Sang SON, Iman Hajirasouiha, Kypros Pilakoutas, “Strength and deformability of waste tyre rubber-filled reinforced concrete columns”, pp. 218~226, Construction and Building Materials, Vol 25, No 1, 2010
70) Ki Sang SON, Won Mo Gal, Jae Nam CHOI, In Young SONG, “Countermeasures for safety Management in subcontractor work at construction site using AHP technique”, pp27-35, Vol.26, No.1, The KOREA SOCIETY OF SAFETY, Feb. 2011
71) Ki Sang SON, Hyung Sang HAN, “Analysis of Safety Consciousness 6th year in Elementary school”, pp59~68, Vol.13, No.1, Journal of Korea Safety Management & Science, Mar. 2011
72) Ki Sang SON, Jea Young Ryu, “Effect Analysis of Railway Accident due to Recognition for a Cheer Response”, pp69~73, Vol.13, No.1, Journal of Korea Safety Management & Science, Mar. 2011
73) Ki Sang SON, Won Mo GAL, “Reasonability of Determination Equations for Assignment of Safety Engineers to Construction Sites.”, pp157~162, Journal of Asian Architecture and Building Engineering(JAABE), Vol.10, No.1, May 2011
74) Ki Sang SON, Sung Rae Kim, “Reasonable Assignment of Aged People at Construction Site”, pp32~43, Vol.27, No.1, Journal of the Korean Society of Safety, Oct. 2012
75) Ki Sang SON, Jae Nam Choi, Sung Il Jin , “An Experimental Study on Internal Force By Using Fiber Rope Concrete Beam”, pp77~82, Vol.27, No.2, Journal of the Korean Society of Safety, Apr. 2012
76) Ki Sang SON, Soo Nam Jeon , “An Experimental Study on Penetration Resistance of Styrofoams Mounted on Falling Prevention Net for Re-bar”, pp95~98, Vol.27, No.5, Journal of the Korean Society of Safety, Oct. 2012
77) Ki Sang SON, Hak Soo Yang, C. Guedes Soares, “Accidents of Foreign Workers at Construction Sites in Korea”, pp197~203, Journal of Asian Architecture and Building Engineering(JAABE), Sep. 2013

1)Yi Hyung LEE, Song LEE and Ki Sang SON, “Construction Safety Engineering”, Ki Moon Dang Publication, revised in 2001
2)Ki Sang SON, “Structural Analysis for Construction Safety”, Ki Moon Dang, 1995.
3)Ki Sang SON, “Construction Safety Design Process”, Ki Moon Dang, 1996
4)Ki Sang SON, “Construction Work Safety Analysis”, Ki Moon Dang, 1994
5)Ki Sang SON, and Hak Soo YANG, “Practical Compensation for Occupational Safety & Health”, Ki Moon Dang, 2005
6)Ki Sang SON, and Jeong Bong PARK, “Preventing Technique of Noise and Vibration in Construction Practice”, Ki Moon Dang, 2006

PATENTS - DESIGNS

PROFESSIONAL AND OTHER ACTIVITIES